The Siemens part number 6SE7016-1TA84-1HF3 is a SIMOVERT Masterdrives Power Module, specifically designed for power output applications. It features a rated current of 17.5 amps and a voltage range of 510-620 volts DC.
Technical Specifications
- Rated Current: 17.5 amps
- Voltage Range: 510-620 volts DC
Alarm/Error Codes
The Siemens SIMOVERT Masterdrives Power Module does not have a specific section dedicated to alarm or error codes. However, it is likely that the module would be integrated into a larger system and would report any issues through standard communication protocols, such as Ethernet or Profibus.
User Manuals
The user manual for the Siemens SIMOVERT Masterdrives Power Module is not readily available online. It is recommended to contact the manufacturer or a qualified representative for access to the manual or any specific instructions required for the module's use.
Troubleshooting
Troubleshooting for the Siemens SIMOVERT Masterdrives Power Module would typically involve checking the power supply, voltage levels, and communication connections. If issues persist, it is recommended to consult the user manual or contact the manufacturer for further assistance.
Programming
The programming of the Siemens SIMOVERT Masterdrives Power Module is not detailed in the available information. It is likely that the module would be integrated into a larger system and programmed through a control system, such as a programmable logic controller (PLC). The specific programming details would depend on the system architecture and software used.
Installation
The installation of the Siemens SIMOVERT Masterdrives Power Module involves connecting it to the power supply and integrating it into the control system. The module's physical dimensions are approximately 3.0 inches by 16.0 inches by 12.0 inches, and it is designed to operate in a standard industrial setting.
Download the Data Sheet Go to product