The Siemens part number 6SE6440-2AD31-8DA1 is a spare part for the MICROMASTER 440 built-in class A filter. It is designed for use in industrial settings, specifically for 3-phase AC motors operating within a voltage range of 380-480 V and a frequency range of 47-63 Hz. This part supports constant torque and has an overload capacity of 150% for 60 seconds and 200% for 3 seconds. It is rated for 18.5 kW of power and is suitable for applications where high torque is required.
Technical Specifications
- Power Rating: 18.5 kW (25 HP)
- Motor Rating: 400V 3 Ph
- Overload Capacity: 150% for 60 seconds and 200% for 3 seconds
- Frequency Range: 47-63 Hz
- Input Voltage: 3ph 380-480V ± 10%
- Input Current: 37A at high overload or 43A when Fan/Pump rating set
- Speed Control Range: 0Hz to 650Hz
- Braking: To 28 Ohm minimum external resistor (not supplied)
- Dimensions: 275mm Wide x 520mm High x 245mm Deep
- Weight: 17 KG
- Mounting: Via 4 x M8 Bolts
- Ambient Temperature: -10° to 50°C
- Ventilation Space: 300mm above and below, 0mm at sides
Alarm/Error Codes
No specific information on alarm or error codes for this part is available.
User Manual
The user manual for the Siemens MICROMASTER 440 is not directly linked to this part number. However, general user manuals for the MICROMASTER 440 series can be found on Siemens' official website or through authorized distributors.
Troubleshooting
Troubleshooting information for the Siemens MICROMASTER 440 is not directly linked to this part number. However, general troubleshooting guides for the MICROMASTER 440 series can be found on Siemens' official website or through authorized distributors.
Programming
No specific information on programming for this part is available.
Installation
The installation guidelines for the Siemens MICROMASTER 440 are not directly linked to this part number. However, general installation guides for the MICROMASTER 440 series can be found on Siemens' official website or through authorized distributors. The part is designed for wall mount in a clean environment or cubicle mount, and it requires a ventilation space above and below of 300mm and at sides of 0mm, allowing drives to be mounted side by side.
Download the Data Sheet Go to product