Description
The Siemens part number 6SC6500-0UG01 is a SIMOREG converter with an extension controller module and field-weakening control. It is designed for use in power conversion and energy conversion applications. The device is built to operate in a wide range of environmental conditions, including ambient temperatures from -10°C to 50°C and protection against dust and water with an IP20 rating.
Technical Specifications
- Input voltage: 1AC 200-240V +10/-10% at 47-63Hz
- Power rating: 2.2 kW constant torque, 150% overload for 60 seconds
- Dimensions: 202 x 149 x 172 mm (H x W x D)
- Operating temperature: -10°C to 50°C
- Protection: IP20
- Power supply: 1AC 200-240V +10/-10% at 47-63Hz
Alarm/Error Codes
No specific information on alarm or error codes for this part number was found in the provided search results.
User Manuals
The search results do not provide direct links to user manuals for this specific part number. However, user manuals can often be obtained from the manufacturer's website or through contact with authorized dealers.
Troubleshooting
Troubleshooting for this specific part number would typically involve consulting the user manual and troubleshooting guides provided by Siemens. If no specific troubleshooting information is available for this part number, general troubleshooting procedures for similar devices can be consulted.
Programming
The programming of the 6SC6500-0UG01 is typically done using Siemens' SIMATIC software and programming tools. The device is designed to be integrated into larger industrial automation systems, and its programming is likely to involve setting up the device's parameters and configuring its operation within the broader system.
Installation
The installation of the 6SC6500-0UG01 involves connecting it to the power supply and integrating it into the larger industrial automation system. The device's installation should be performed according to the manufacturer's instructions and any relevant safety guidelines.
Download the Data Sheet Go to product