The Siemens part number 6AV2128-3MB06-0AX1
Refers to the SIMATIC HMI MTP1200 Unified Comfort Panel, a touch-operated human-machine interface (HMI) designed for industrial automation applications. This panel features a 12.1-inch widescreen TFT display capable of displaying 16 million colors, making it suitable for a variety of industrial settings where clear and detailed visual information is required.
Technical Specifications
- Display: 12.1" widescreen TFT display with 16 million colors
- Touch operation: Yes
- Interface: Ethernet, 2-Port-Switch RJ45, RS422/485, and USB
- Supply voltage: 24 V DC
- Permissible voltage range: 19.2 V to 28.8 V DC
- Current consumption: 0.6 A
- Mounting cutout: 310 mm (width) and 221 mm (height)
- Device depth: 64 mm
- Housing material: Aluminum
- Operating temperature range: 0 °C to 50 °C
- Protection rating: IP65 (front) and IP20 (rear)
- Installation type: Mounting in landscape or portrait format
- System clock: Hardware real-time clock
- Output type (acoustics): Buzzer
- Protocols: PROFINET
- Configuration software: WinCC Unified Comfort Engineering (TIA Portal)
- Approval: CE and cULus
- Customs tariff number: 85371098...
Alarm/Error Codes
The Siemens SIMATIC HMI MTP1200 Unified Comfort Panel does not provide specific information on alarm or error codes. However, it is likely that these codes are documented in the user manual or in the configuration software, WinCC Unified Comfort Engineering (TIA Portal), which is used to program and configure the panel.
User Manuals
The user manual for the Siemens SIMATIC HMI MTP1200 Unified Comfort Panel is not publicly available. It is recommended to contact Siemens directly or consult the user manual provided with the product for detailed instructions on its operation and configuration.
Troubleshooting
Troubleshooting information for the Siemens SIMATIC HMI MTP1200 Unified Comfort Panel is not publicly available. It is recommended to consult the user manual or contact Siemens technical support for assistance with troubleshooting and resolving any issues that may arise.
Programming
The Siemens SIMATIC HMI MTP1200 Unified Comfort Panel is programmed using the WinCC Unified Comfort Engineering (TIA Portal) software. This software provides a comprehensive set of tools for configuring and programming the panel, including the ability to create custom graphics, configure alarm and error handling, and set up communication protocols.
Installation
The Siemens SIMATIC HMI MTP1200 Unified Comfort Panel is designed for mounting in a landscape or portrait format. It is recommended to follow the manufacturer's installation instructions and ensure that the panel is securely fastened to prevent damage or accidental dislodging. Additionally, the panel should be installed in an area with a suitable operating temperature range and protected from environmental factors that could compromise its performance or longevity.
Download the Data Sheet Go to product