The part number 2090-XXNPMF-10S20 is a cable designed by Rockwell Automation, specifically for use with their Allen-Bradley products. This cable is a power cable with a gauge of 10 AWG (American Wire Gauge) and a black insulation. It is 20 meters long and features a DIN M40 Type 4 connector, which is a non-flexible connector suitable for industrial applications.
Technical Specifications
- Gauge: 10 AWG
- Insulation: Black
- Length: 20 meters
- Connector: DIN M40 Type 4
- Flexibility: Non-flexible
Alarm/Error Codes
The documentation provided does not include specific information on alarm or error codes for this part number. It is likely that these codes are specific to the system or device that the cable is used with, and would require additional documentation or support from the manufacturer or system integrator.
User Manuals
The user manuals for this product are not directly linked in our research. However, Rockwell Automation provides technical information and user manuals for their products on their website, which can be accessed through the "Support" section. The user manual for this specific product may be available through this resource.
Troubleshooting
Troubleshooting for this product would typically involve identifying the specific issue with the cable or its connection to the device. This could involve checking for physical damage, ensuring proper connections, and verifying the cable's specifications match those required by the device. If the issue persists, it may be necessary to consult the user manual or contact Rockwell Automation support for further assistance.
Programming
The programming of this cable is not a function of the cable itself but rather of the device it is connected to. The programming of the device would depend on its specific capabilities and the requirements of the system it is part of. This would typically involve configuring the device's settings and parameters using software provided by the manufacturer or system integrator.
Installation
The installation of this cable involves connecting it to the device it is designed for, ensuring that the connections are secure and meet the specifications required by the device. This may involve following specific guidelines or instructions provided by the manufacturer or system integrator.