The Allen-Bradley 2090-XXNPMF-10S07 is a power and feedback cable designed for use with Kinetix 2090 drives. It is a non-flexible, power-only cable with a length of 7 meters and a conductor size of 10 AWG. This cable is used for connecting the motor end bayonet connector to the drive end flying leads, providing power to the motor. The cable is designed to withstand a maximum voltage of 600 volts.
Technical Specifications
- Length: 7 meters
- Conductor Size: 10 AWG
- Voltage Rating: 600 volts
- Cable Type: Non-flexible, power-only
Alarm/Error Codes
No specific alarm or error codes are mentioned for this product. It is primarily a cable designed for connecting power and feedback signals between the motor and the drive, rather than a device that generates error codes.
User Manuals
The user manual for this product is not explicitly mentioned. However, the documentation provided by Rockwell Automation includes installation instructions and technical data for the Kinetix 2090 Power and Feedback Cables, which would likely cover the usage and installation of the 2090-XXNPMF-10S07 cable.
Troubleshooting
Troubleshooting for this cable would typically involve checking the cable connections, ensuring that the cable is properly secured and not damaged, and verifying that the power and feedback signals are correctly routed. If issues persist, it may be necessary to consult the user manual or contact technical support for further assistance.
Programming
The 2090-XXNPMF-10S07 cable does not require programming. It is a passive cable designed to transmit power and feedback signals between the motor and the drive.
Installation
The installation of this cable involves connecting the motor end bayonet connector to the drive end flying leads. The cable should be securely fastened to prevent damage or disconnection during operation. The installation instructions provided by Rockwell Automation cover the installation of Kinetix 2090 Power and Feedback Cables, which would include the 2090-XXNPMF-10S07 cable.
Go to product