The part number 2090-U3AE-D4415 is a two-axis pre-wired cable designed for use with Allen Bradley's Ultra3000 servo drive and the ControlLogix 1756-M02AE module. This cable is specifically designed for applications that require precise control and synchronization of two-axis motion systems.
Technical Specifications
The technical specifications of this cable are detailed in the provided datasheets and product descriptions. Key features include:
- Length: The cable is available in a 15-meter length, making it suitable for a variety of industrial automation applications where space is limited but precise control is required.
- Connectors: The cable features a non-flexible CN2 connector at one end and flying leads at the other, allowing for easy connection to the Ultra3000 drive and the 1756-M02AE module.
- Cable Material: The cable is constructed using 0.75 mm2 (18 AWG) material, which provides a reliable and durable connection for the motion system.
Alarm/Error Codes
Since this is a cable and not a control device, it does not have alarm or error codes. Any issues with the cable would typically be related to physical damage or improper connection, which would not trigger specific error codes.
User Manuals
The user manual for this cable is not explicitly mentioned in our research. However, it is likely that the user manual for the Ultra3000 drive and the ControlLogix 1756-M02AE module would provide detailed information on the installation and operation of this cable.
Troubleshooting
Troubleshooting issues with this cable would typically involve checking the physical connections and ensuring that the cable is not damaged. If issues persist, it may be necessary to consult the user manual for the Ultra3000 drive and the ControlLogix 1756-M02AE module or contact technical support for further assistance.
Programming
The programming of this cable is not a direct concern, as it is a physical component that connects the Ultra3000 drive to the ControlLogix 1756-M02AE module. Programming would typically involve configuring the drive and module using software such as Rockwell's RSLogix 5000 or RSLogix 5000 Micro.
Installation
The installation of this cable involves connecting the non-flexible CN2 connector at one end to the Ultra3000 drive and the flying leads at the other end to the 1756-M02AE module. The cable should be securely fastened to prevent damage or disconnection during operation.
Go to product