The part number 2090-DANBT-18S09 is a servo cable designed for use with Kinetix 3 drives and TL motors. It is a non-flexible cable with a motor end bayonet connector and a drive end flying lead. The cable is rated for 600 volts and features an 18 AWG conductor. It is designed for use in industrial applications and is UL registered to AWM requirements.
Technical Specifications
- Voltage Rating: 600V
- Conductor Size: 18 AWG
- Jacket Material: Industrial Grade Thermoplastic Elastomer
- Length: 9 meters
- Certifications: UL registered to AWM requirements
Alarm/Error Codes
No specific alarm or error codes are documented for this part number. It is primarily a cable designed for connecting servo motors to drives, and it does not have any built-in error detection or alarm capabilities.
User Manuals
The user manual for this part number is not explicitly mentioned in our research. However, it is likely that the user manual for the Kinetix 3 drives and TL motors, which this cable is designed for, would provide detailed information on its installation, operation, and troubleshooting.
Troubleshooting
Troubleshooting for this part number would likely involve checking the cable for damage or wear, ensuring proper connections to the motor and drive, and verifying that the drive and motor are functioning correctly. If issues persist, it may be necessary to consult the user manual for the Kinetix 3 drives and TL motors or contact a technical support specialist.
Programming
This part number is a cable and does not have any programming capabilities. It is designed to provide a physical connection between the servo motor and the drive, allowing for the transfer of power and control signals.
Installation
The installation of this cable involves connecting the motor end bayonet connector to the servo motor and the drive end flying lead to the Kinetix 3 drive. The cable should be routed in a way that minimizes stress and wear, and it should be secured to prevent damage or disconnection during operation. The installation process is likely detailed in the user manual for the Kinetix 3 drives and TL motors.
Go to product