The part number 2090-CSWM1DE-14AA46 is a cable designed for use with Allen-Bradley's Kinetix 5700 servo drive systems. It is a single motor power cable with a flying lead at the drive end, featuring a 14 AWG wire and a standard, non-flexible construction. The cable is 46 meters long and has a TPE (thermoplastic elastomer) jacket, which provides mechanical and chemical properties suitable for industrial applications.
Technical Specifications
- Construction: The cable has an outer diameter of approximately 17 mm, with a green/yellow core color and a 12-meter length. It uses a drive-end connector type optimized for Kinetix 5700 and has eight cores, including a protective conductor. The core identification is by color, and the outer sheath is orange. The conductor material is copper, with a tinned surface.
- Electrical: The cable is designed for a nominal voltage of 1000 V and is a single motor power cable with four power and two feedback (digital communication) conductors. The AWG size is 14, and the cable type is a hybrid cable with low capacitance design to maximize system power density.
- Mechanical: The cable has a nominal cross-section conductor of 2.08 mm², which is equivalent to 4.1 kcmil. It is a standard, non-flexible cable with a weight of approximately 0.185 kg per meter. The twisted cores are not present, and the accessory component is the cable itself. The static bend radius is 7 times the cable diameter, and the features include a low capacitance design, a speedtec connection system, and a TPE jacket with mechanical and chemical properties.
- Environmental: The maximum conductor temperature is 105°C, which is suitable for most industrial applications.
User Manuals and Documentation
For detailed product literature and technical specifications, please refer to the Literature Library results for the publication number KNX-TD004.
Troubleshooting and Programming
Troubleshooting and programming for this cable are typically handled through the Kinetix 5700 servo drive system's control software and documentation, which are available from Rockwell Automation. The specific troubleshooting and programming procedures will depend on the application and the system configuration.
Installation
The installation of this cable is typically handled by qualified electricians or technicians familiar with industrial automation systems. The cable should be installed according to the manufacturer's instructions and local electrical codes. It is recommended to consult the product documentation and the Kinetix 5700 servo drive system's installation manual for specific installation procedures.
Go to product