The Rockwell Automation 2090-CSBM1DF-18AA38 is a single motor cable designed for use with Kinetix 5500 servo drives. It is part of the 2090-Series Single Motor Cables, which are designed for continuous-flex applications. This cable is specifically designed for use with Kinetix 5500 servo drives and features a single speedTec DIN connector at the motor end and a single speedTec DIN connector at the drive end.
Technical Specifications
- Motor-end Connector Type: Single SpeedTec DIN Connector
- Wire Gauge Size (AWG): 18 AWG
- Cable Style: Continuous-flex
- Cable Type: Single Motor Power and Feedback with Brake Wires
- Length: 20 meters
Alarm/Error Codes
No specific alarm or error codes are mentioned in the provided documentation for this product. It is likely that any error codes or alarm conditions would be specific to the Kinetix 5500 servo drive system and not the cable itself.
User Manuals
The user manual for the 2090-Series Single Motor Cables is available from Rockwell Automation's literature library. The manual provides detailed information on the cable specifications, installation, and troubleshooting procedures.
Troubleshooting
Troubleshooting procedures for the 2090-Series Single Motor Cables are likely to involve checking the cable connections, ensuring proper installation, and verifying the cable's specifications match the requirements of the Kinetix 5500 servo drive system. If issues persist, it may be necessary to consult the user manual or contact Rockwell Automation support.
Programming
The 2090-Series Single Motor Cables do not require programming. They are designed to be used with Kinetix 5500 servo drives, which are programmed separately. The programming of the servo drives is typically done using software provided by Rockwell Automation.
Installation
The installation of the 2090-Series Single Motor Cables involves connecting the motor-end connector to the motor and the drive-end connector to the Kinetix 5500 servo drive. The cable should be routed to minimize stress and ensure continuous flex without damage. The cable's specifications should match the requirements of the servo drive system.
In summary, the Rockwell Automation 2090-CSBM1DF-18AA38 is a single motor cable designed for use with Kinetix 5500 servo drives. It features a continuous-flex cable with a single speedTec DIN connector at both ends and is designed for use in applications where the cable is subject to continuous flexing without damage. The cable's specifications should match the requirements of the servo drive system, and installation involves connecting the cable to the motor and drive, ensuring proper routing to minimize stress.
Go to product