The part number 2090-CSBM1DE-14AA01 is a single motor cable from the 2090 series, designed for use with Kinetix 5700 servo drive systems. It is a standard, non-flex cable with a 14 AWG wire size and a TPE (thermoplastic elastomer) jacket. The cable is 1 meter long and features a DIN connector at the drive-end, making it suitable for applications where a single speedTec DIN connector is required.
Technical Specifications
- Wire Size (AWG): 14
- Cable Length (m): 1
- Jacket Material: TPE
- Cable Type: Standard, non-flex
- Connector Type: DIN, drive-end
- Cable Shield: Shielded
- Bend Radius: Not specified in the provided information, but generally for standard non-flex cables, the bend radius is 12 times the cable diameter.
Alarm/Error Codes
No specific alarm or error codes are associated with this part number, as it is a cable and not a control system component. Any issues with the cable would likely be related to physical damage or improper installation, rather than specific error codes.
User Manuals
The user manuals for the 2090 series cables are available from Rockwell Automation, but they are not publicly accessible through our research. The manuals are likely to cover installation, troubleshooting, and maintenance procedures for the cables.
Troubleshooting
Troubleshooting for the 2090 series cables would typically involve checking for physical damage, ensuring proper installation, and verifying the cable's electrical connections. If issues persist, it may be necessary to consult the user manuals or contact Rockwell Automation support.
Programming
The 2090 series cables do not require programming as they are simply a physical component connecting the motor to the drive system. The programming and configuration of the drive system would typically be done through the drive's control panel or software interface.
Installation
The installation of the 2090 series cables involves connecting the cable to the motor and the drive system, ensuring proper electrical connections, and securing the cable in a way that prevents damage or excessive bending. The cables should be installed according to the manufacturer's guidelines and any relevant safety regulations.
Go to product