The Allen-Bradley 2090-CSBM1DE-08AF10 is a motor cable designed for use in industrial settings, particularly with Kinetix 5500 or Kinetix 5700 servo drives. It is part of the 2090-Series Single Motor Cables, which are designed for either Kinetix 5500 or Kinetix 5700 servo drives. The cable features flying leads and lead preparation for easy connection to the drives.
Technical Specifications
- Cable Style: Continuous-flexible
- Nominal Cross Section Conductor (AWG): 14
- Weight: Approximately 0.551 kg/m (continuous-flex, power with brake wire)
Alarm/Error Codes
No specific alarm or error codes are mentioned in our research. These codes are typically specific to the drive systems and may not be directly related to the cable itself.
User Manuals
The user manual for the Allen-Bradley 2090-CSBM1DE-08AF10 is not directly available through our research. However, Rockwell Automation provides general documentation on the 2090-Series Single Motor Cables, including technical specifications and installation guidelines.
Troubleshooting
Troubleshooting for the Allen-Bradley 2090-CSBM1DE-08AF10 is likely to involve checking the cable connections, ensuring proper installation, and verifying the drive system settings. The specific troubleshooting procedures would depend on the drive system and the error or issue encountered.
Programming
The Allen-Bradley 2090-CSBM1DE-08AF10 is a cable and does not require programming. It is designed for use with servo drives and is not a programmable component.
Installation
The installation of the Allen-Bradley 2090-CSBM1DE-08AF10 involves connecting the cable to the servo drive and motor, ensuring proper cable routing, and securing the cable in place to prevent damage or wear. The specific installation procedures would depend on the drive system and the application in which the cable is being used.
In summary, the Allen-Bradley 2090-CSBM1DE-08AF10 is a continuous-flexible motor cable designed for use with Kinetix 5500 or Kinetix 5700 servo drives. It features a 14 AWG conductor and is approximately 0.551 kg/m in weight. The cable is designed for continuous flexing and is suitable for use in industrial settings where motor control is required.
Go to product