The Allen-Bradley 2090-CPWM7DF-16AA15 is a servo power cable designed for use with the MP-Series of drives from Rockwell Automation. It is a motor power only cable, meaning it is intended for use in applications where the motor power is not shared with other components. The cable features a SpeedTec DIN connector on the drive end and a flying lead on the motor end, which allows for easy connection to the motor. It is 15 meters in length and has a standard (non-flexible) construction.
Technical Specifications:
- Amperage Rating: 8
- Cable Function: Motor Power Only
- Cable Length: 15 Meters
- Cable Options: 16 AWG
- Cable compatibility note: Cable Note:
- Conductor Size: 16
- Drive End Connector Type: Drive-end, Flying-lead
- Encoder note: Encoder Note:
- Flex Type: Standard (Non-Flex)
- Length: 15
- Motor End Connector Type: SpeedTec DIN Connector
- NUMBER OF CONDUCTORS: 4
- Special Features: Threaded DIN Connector
- Sub Brand Name: MP Series
- Type: Servo Power cable
- Voltage Rating: 600
Alarm/Error Codes:
No specific alarm or error codes are mentioned in our research for this product.
User Manuals:
The user manual for this product is not directly accessible through our research. However, it is likely that the user manual can be obtained from the manufacturer or a supplier.
Troubleshooting:
Troubleshooting information for this product is not readily available through our research. It is recommended to consult the user manual or contact the manufacturer or a supplier for assistance with troubleshooting.
Programming:
Programming information for this product is not directly accessible through our research. However, it is likely that the product can be programmed using the MP-Series drives from Rockwell Automation, which would require specific knowledge of the drives and programming software.
Installation:
Installation instructions for this product are not directly accessible through our research. However, it is likely that the product can be installed by connecting the SpeedTec DIN connector to the drive and the flying lead to the motor, following standard electrical safety guidelines and the manufacturer's instructions.