The part number 2090-CPBM7E7-08AF07 is a SpeedTec extension cable designed for use with Rockwell Automation's Kinetix 2090 motor/actuator systems. This cable is part of the 2090-Series Motor/Actuator Cables, which are designed for use in industrial automation applications such as motor control and feedback systems.
Technical Specifications
- Cable Type: The cable is a continuous-flex extension cable designed for use in motor power and feedback applications.
- Length: The cable has a length of 7 meters (23 feet).
- Connectors: The cable features SpeedTec DIN connectors on both ends, one a plug and the other a receptacle, designed for mating with other 2090-Series standard, non-flex cables.
- Voltage: The cable is rated for 600V.
- Insulation: The cable has a green (DESINA, RAL 6018) insulation, which is a standard color for feedback cables in the 2090-Series.
- Weight: The cable weighs approximately 0.697 kg per meter (0.468 pounds per foot).
Alarm/Error Codes
The documentation provided does not include specific information on alarm or error codes for this cable. However, it is likely that any issues with the cable would be related to its physical connection or installation rather than specific error codes.
User Manuals
The user manuals for the 2090-Series Motor/Actuator Cables are available online and provide detailed information on installation, configuration, and operation of the cables. These manuals are essential for understanding the proper use and maintenance of the cables.
Troubleshooting
Troubleshooting for the 2090-CPBM7E7-08AF07 cable would typically involve checking the physical connections and ensuring that the cable is properly installed and configured. If issues persist, it may be necessary to consult the user manuals or contact technical support for assistance.
Programming
The cable itself does not require programming. It is a physical component designed to connect and transmit signals between devices in a motor control system. Programming would typically be done on the devices connected to the cable, such as the motor controller or drive unit.
Installation
Installation of the 2090-CPBM7E7-08AF07 cable involves connecting the SpeedTec DIN plug on the motor end to the SpeedTec DIN receptacle on the other end. The cable should be routed carefully to avoid sharp bends, which can cause damage or stress on the cable. The cable should be secured with a rigid mount at least 7 cable diameters from each end to protect against flexing where it connects to the motor or shield clamp.
Go to product