The part number 2090-CPBM7DF-12AA60 is a SpeedTEC cable designed for motor power with brake wires, featuring a SpeedTec DIN connector at the drive-end and a flying-lead configuration. It is a standard (non-flex) cable with a length of 60 meters and an AWG (American Wire Gauge) of 12. This cable is used in industrial automation systems, particularly with Allen-Bradley (Rockwell Automation) products, such as the Kinetix motor power and feedback cables.
Technical Specifications
- Motor End Connector Type: SpeedTec DIN Connector
- Flex Type: Standard (Non-Flex)
- Encoder Note: No encoder note specified
- Cable Length: 60 Meters
Alarm/Error Codes
No specific alarm or error codes are mentioned for this product. For troubleshooting and error handling, refer to the user manual and technical specifications of the specific system or device using this cable.
User Manuals
The user manual for this product is not explicitly mentioned. However, it is likely that the user manual for the specific system or device using this cable would provide detailed instructions on its installation, configuration, and troubleshooting.
Troubleshooting
Troubleshooting for this product would typically involve checking the cable connections, ensuring proper installation, and verifying the compatibility of the cable with the system or device it is used with. For more detailed troubleshooting procedures, refer to the user manual and technical specifications of the system or device.
Programming
This product does not require programming. It is a physical cable designed for connecting motor power and brake wires in industrial automation systems.
Installation
The installation of this cable involves connecting it to the motor and the system or device it is used with, ensuring proper connections and securing the cable according to the system's specifications. For detailed installation instructions, refer to the user manual and technical specifications of the system or device.
In summary, the 2090-CPBM7DF-12AA60 is a standard (non-flex) SpeedTEC cable designed for motor power with brake wires, featuring a SpeedTec DIN connector at the drive-end and a flying-lead configuration. It is used in industrial automation systems and is characterized by its length of 60 meters and AWG of 12.
Go to product