Allen-Bradley 2090-CPBM7DF-08AA20 SpeedTEC Cable, Motor Power Only
The 2090-CPBM7DF-08AA20 is a SpeedTEC Motor Power Only Cable designed for use with the Kinetix 2090 Power and Feedback Cables. This cable falls into the standard, non-flex category and measures 20 meters in length. It has a SpeedTec DIN connector on the drive end and incorporates a flying-lead design. The cable's diameter is 8 AWG, making it suitable for use in applications where continuous flexing isn't necessary.
Technical Specifications
This cable is defined by a bend radius of 141 mm (5.5 inches) and a diameter of 20.1 mm (0.79 inches). Despite its robust structure, the cable is created for power-only applications and isn’t intended for continuous flexing or high-vibration environments.
Installation and Troubleshooting
As it is a physical component and not a control device, the cable does not carry particular alarm or error codes. However, a correct installation and secure connection are essential to avoid potential issues. For troubleshooting, the physical connections should be inspected, ensuring that the cable is properly secured and undamaged. If problems continue, it might be beneficial to consult the user manual or contact technical support for further assistance.
User Manuals
You can find user manuals for the Kinetix 2090 Power and Feedback Cables, including the 2090-CPBM7DF-08AA20 cable, from Rockwell Automation. Each manual offers elaborate installation instructions, inclusive of pinouts for the power and brake cables.
Passive Component
As a passive component, this cable does not need programming. Its design intends for a direct connection to the motor, and it doesn't have any electronic components requiring configuration.
Installation
Installation involves connecting the cable to the motor and ensuring it’s properly secured to prevent damage or disconnection. Detailed instructions for installation, including pinouts for power and brake cables, can be found in the user manual.
Summary
In conclusion, the Allen-Bradley 2090-CPBM7DF-08AA20 is a standard, non-flex, power-only cable that you can use with the Kinetix 2090 Power and Feedback Cables. It features a SpeedTec DIN connector on the drive-end, a flying-lead design, and measures 20 meters in length. The cable has a diameter of 8 AWG and is fit for applications not requiring continuous flexing.
Go to product