ROCKWELL AUTOMATION 2090-CPBM7DF-06AA25
The ROCKWELL AUTOMATION 2090-CPBM7DF-06AA25 is a Servo Drive Cable Assembly designed for motor power transmission with brake wires. It has a length of 25 meters and features a SpeedTec DIN connector at the motor end. The cable type is standard (non-flexible), and it includes an encoder note, although the specifics of this note are not provided in the available documentation.
Technical Specifications
- Length: 25 meters
- Motor End Connector Type: SpeedTec DIN Connector
- Flex Type: Standard (Non-Flex)
- Encoder Note: (No detailed information available)
Alarm/Error Codes
No specific alarm or error codes are mentioned for this product. It is likely that any error codes would be specific to the system or application in which the cable is used, rather than being inherent to the cable itself.
User Manuals
No user manuals are directly linked to this product. However, user manuals for similar products or systems may provide general guidance on troubleshooting and error handling.
Troubleshooting
Troubleshooting for this product would likely involve identifying issues with the motor power transmission or brake wires. This could involve checking for loose connections, damaged cables, or incorrect installation. If the issue persists, it may be necessary to consult the user manual for the system or application in which the cable is used, or contact technical support for further assistance.
Programming
The programming of this product is not directly relevant, as it is a physical cable assembly rather than a programmable device. However, the programming of the system or application in which the cable is used may be necessary to configure the motor power transmission and brake functions.
Installation
The installation of this product involves connecting the motor end to the motor and the other end to the control system or power source. It is important to ensure that the connections are secure and the cable is not damaged during installation. Additionally, the brake wires should be connected according to the specific requirements of the system or application.
In summary, the ROCKWELL AUTOMATION 2090-CPBM7DF-06AA25 is a Servo Drive Cable Assembly designed for motor power transmission with brake wires. It has a length of 25 meters and features a SpeedTec DIN connector at the motor end. The cable type is standard (non-flexible), and it includes an encoder note. Troubleshooting and installation involve identifying and resolving issues with the motor power transmission and brake wires, and ensuring secure connections during installation.
Go to product