The part number 2090-CPBM7DF-02AA30 is a power and brake cable designed for use with Rockwell Automation's Kinetix 2090 servo drives. The cable is 30 meters in length and is designed for use in industrial automation applications where high-performance and reliability are critical.
Technical Specifications
The cable is designed with a DIN connector and is suitable for use in a variety of applications, including those that require high-speed data transmission and precise control. The technical specifications for this cable are detailed in the Rockwell Automation publication KNX-TD004K-EN-P, which covers the Kinetix Rotary and Linear Motion Cable Specifications.
Alarm/Error Codes
The documentation provided does not include specific information on alarm or error codes for this cable. However, it is likely that the cable is designed to operate within the standard specifications for Rockwell Automation's Kinetix 2090 servo drives, which would include standard error and alarm codes for the drive itself.
User Manuals
The user manual for this cable is not explicitly mentioned in our research. However, it is likely that the user manual for the Kinetix 2090 servo drives would cover the installation, operation, and troubleshooting of the cable.
Troubleshooting
Troubleshooting for this cable would likely involve checking the cable's physical integrity, ensuring that it is properly connected to the servo drive and any other components it interfaces with, and verifying that the drive is functioning correctly. The troubleshooting process would likely involve consulting the user manual for the Kinetix 2090 servo drives and any other relevant documentation.
Programming
The programming of the Kinetix 2090 servo drives is typically done using Rockwell Automation's ControlLogix or CompactLogix programmable controllers. The programming process involves setting up the drive's parameters, such as its speed and acceleration, and configuring its communication protocols. The specific programming requirements for this cable would depend on the application and the drive's configuration.
Installation
The installation of the cable involves connecting it to the Kinetix 2090 servo drive and any other components it interfaces with. The cable should be securely fastened to prevent damage or disconnection during operation. The installation process is detailed in the Rockwell Automation publication KNX-TD004K-EN-P, which covers the Kinetix Rotary and Linear Motion Cable Specifications.
Go to product