The part number 1783-BMS10CGP is an Allen-Bradley Stratix 5700 Ethernet Switch. This device is designed for industrial automation and communication in various sectors such as manufacturing, process control, and building automation. It is a network device that provides reliable and secure communication between different devices on a network.
Technical Specifications
The Stratix 5700 Ethernet Switch has several key technical specifications that define its capabilities and features:
- Ports: It has 8 copper 10/100 ports and 2 combination ports (copper or SFP slot) that support 10/100/1000 Mbps speeds.
- Firmware: The device runs with full firmware, which provides advanced features and security.
- Power Consumption: It has a maximum power consumption of 20 W, which is relatively low for a device with these capabilities.
- Environmental Conditions: The device operates in a range of temperatures from -25°C to 75°C, making it suitable for use in various environments.
- Certifications: The device meets several international standards and regulations for safety and quality.
Alarm and Error Codes
The Stratix 5700 Ethernet Switch does not have a specific section dedicated to alarm and error codes. However, it does provide features such as CIP Sync (IEEE 1588) and DLR (Distributed Lockstep), which ensure reliable and synchronized communication on the network. These features are designed to prevent errors and ensure that data transmission is accurate and timely.
User Manual
The user manual for the Stratix 5700 Ethernet Switch is not explicitly mentioned in our research. However, it is likely that Rockwell Automation, the manufacturer, provides detailed documentation and user guides for the device, which can be accessed through their official website or support channels.
Troubleshooting
Troubleshooting for the Stratix 5700 Ethernet Switch involves identifying and resolving issues related to network connectivity, communication, and power supply. The device's technical specifications and user manual should be consulted to understand its capabilities and potential issues that may arise. Additionally, Rockwell Automation's support resources and online forums may provide valuable information and guidance for troubleshooting specific problems.
Programming
The Stratix 5700 Ethernet Switch is designed to operate as a network device and does not require programming in the classical sense. However, it can be configured and managed using various software tools and protocols, such as Modbus TCP and Modbus UDP, which are supported by the device.
Installation
The installation of the Stratix 5700 Ethernet Switch involves mounting it on a DIN rail and connecting it to the network using Ethernet cables. The device should be powered on and configured according to the manufacturer's instructions and network requirements. It is important to ensure that the device is properly secured and protected from unauthorized access to prevent potential security risks.
Go to product