The Rockwell Automation 1756-IB16ISOEK is a ControlLogix I/O module designed for digital input/output applications. It is part of the ControlLogix series, which is a line of programmable automation controllers developed by Rockwell Automation. This specific module is designed for use in industrial control systems and is capable of handling digital input and output signals.
Technical Specifications
The 1756-IB16ISOEK has the following technical specifications:
- Operating Voltage Range: 79-132V AC, 47-63 Hz
- Input Delay Time: 10 ms max + filter time (user-selectable filter time: 1 ms or 2 ms)
- Hardware Delay: 8 ms max + filter time (user-selectable filter time: 9 ms or 18 ms)
- Current Draw: 100 mA at 5.1V, 3 mA at 24V
- Total Backplane Power: 0.58 W
- Power Dissipation: 4.5 W at 60°C (140°F)
- Thermal Dissipation: 15.35 BTU/hr
- Off-State Voltage: 20V
- Off-State Current: 2.5 mA
- On-State Current: 5 mA at 74V AC, 16 mA at 132V AC
- Inrush Current: 250 mA
- Input Impedance: 8.25 kΩ at 132V AC, 60 Hz
Alarm/Error Codes
The 1756-IB16ISOEK does not have specific alarm or error codes listed in the provided documentation. However, it is likely that the module follows standard ControlLogix error handling procedures and may use standard error codes defined by Rockwell Automation.
User Manuals
The user manual for the 1756-IB16ISOEK is not provided in our research. However, Rockwell Automation typically provides user manuals for their products through their official documentation website, which can be accessed by searching for the product part number.
Troubleshooting
Troubleshooting for the 1756-IB16ISOEK would involve checking the module's connections, power supply, and configuration settings. The module's documentation and user manual would provide detailed troubleshooting procedures and potential error codes to look for.
Programming
The 1756-IB16ISOEK is programmable using Rockwell Automation's RSLogix 5000 software. This software allows users to configure the module's settings, create programs, and monitor the module's performance.
Installation
The 1756-IB16ISOEK is designed to be installed in a ControlLogix controller chassis. The installation process typically involves connecting the module to the chassis using a removable terminal block (RTB) or a 1492 interface module (IFM), and configuring the module's settings using the RSLogix 5000 software.
Go to product