The Allen-Bradley 160-BA10NSF1 is a versatile variable speed drive from the 160 SSC Series C range, engineered for efficient speed control of three-phase industrial AC motors. Offering a wide operational voltage range of 340-506VAC, this drive supports up to 5 HP motors, with adjustable output voltage and frequency parameters, enhancing flexibility in various industrial applications. Equipped with advanced features such as programmable acceleration, deceleration, and stopping modes, along with comprehensive motor protection for overload, overcurrent, and temperature conditions, the 160-BA10NSF1 ensures reliable operation. It's housed in an IP20-rated enclosure, supporting communication options like RS232 and DeviceNet, and equipped with fan cooling to prevent overheating. With a compact design, microprocessor control, and IGBT technology, it promises quiet, efficient operation, making it ideal for demanding environments while boasting compliance with industry standards.
Go to product
Technical specifications for 160-BA10NSF1
| Brand | Allen-Bradley |
|---|---|
| Part Number/Catalog No. | 160-BA10NSF1 |
| Enclosure Type | Open |
| Input Current | 12.2 A |
| Cooling Method | Fan Cooled |
| Manufacturer | Rockwell Automation / Allen-Bradley |
| Product Family: | 160 Smart Speed Controller (SSC) |
| Input Voltage range: | 304-506 VAC, 3-Phase |
| Input Voltage, nominal: | 380 / 460 VAC, 3-Phase |
| Input Frequency | 50 / 60 Hz |
| Input kVA | 12.2 A |
| Output Current | 10.5 A |
| Output power | 3.7 kW (5.5 HP) - Normal and heavy-duty operation |
| Installation: | DIN Rail Mount |
| Control Method: | Volts per Hertz (V/Hz); Pulse Width Modulation (PWM) |
| Built-in communication port: | RS232 |
| Communication protocol: | DF1 |
| Model: | Analog input signal follower |
| Manufacturer | Allen Bradley / Rockwell Automation |
| Product Type | Variable Speed Drive |
| Drive Type | 160 SSC Variable Speed Drives |
| Voltage Rating | 380-460V |
| Part Number | 160-BA10NSF1 |
| Phase Input | 3 |
| Input Voltage: | 360-460 VAC |
| Current Rating | A10 |
| Input phase: | 3-Phase |
| Output Voltage: | 0-460VAC |
| Model Type | Analog Signal Follower |
| Output Phase: | 3-Phase |
| Series | C |
| Output current | 10.5 A |
| Max. Output Amps | 10.5 |
| Output frequency | 0-240 Hz |
| Operational Input Voltage Range | 340-506V AC |
| Power Dissipation | 120 Watts |
| Efficiency | 97.50% |
| Programmer module: | None installed |
| Dimensions (H,W,D) | 7.58/3.62/7.61 in. |
| Dynamic Braking | Not installed |
| Weight | 5.23 lbs. |
| EMC Filter | Not installed |
| Product Lifecycle Status* | Discontinued/Obsolete |
| Enclosure | IP20 NEMA/Open |
| Communication ports: | Series A and B: optional RS232 and DeviceNet Series C: built-in RS232; optional DeviceNet |
| Operating mode: | analog signal follower |
* The Allen Bradley 160-BA10NSF1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 160-BA10NSF1 units instead of migration.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate
for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct
from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original
Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO
Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware,
whether the firmware is the revision level that you need for your application. DO Supply also makes no representations
as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or
any other source. DO Supply also makes no representations as to your right to install any such firmware on the product.
DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User
License Agreement or similar document related to obtaining or installing firmware.