The Rockwell Automation 154-TP2C16NCD
The Rockwell Automation 154-TP2C16NCD is a 3-phase soft starting controller designed for low-horsepower single- and three-phase squirrel cage induction motors. It is part of the Bulletin 154 Starting Torque Controller (STC) series, which is designed for low-horsepower applications. The device is used to control the starting torque of motors, providing a smooth and controlled start-up process.
Technical Specifications
- Output Voltage: 16 A AC, 200-600VAC
- Supply Voltage: 100-240VAC
- Control Voltage: 24V DC or 24V AC, with a range of -15% to +20% for DC and ±15% for AC
- Isolation Input to Output: 2.5kVrms
- Rated Insulation Voltage: 600V AC
- Blocking Voltage: 1600Vp
- Operational Frequency: 50/60 Hz, with a tolerance of ±10%
- Cooling Type: Natural convection
- Status Indication: LEDs for power supply ON, ramp-up, and ramp-down status
Alarm/Error Codes
The device does not have specific alarm or error codes listed in the provided documentation. However, it is likely that the device will have some form of error indication through the LEDs or other means, but this information is not readily available in our research.
User Manuals
The user manual for the 154-TP2C16NCD is available in the form of a technical data sheet (154-TD001B-EN-P) from Rockwell Automation. This document provides detailed specifications, operating instructions, and troubleshooting information.
Troubleshooting
Troubleshooting information is available in the user manual, which covers common issues and their solutions. Additionally, the manual provides guidelines for testing and commissioning the device.
Programming
The device does not require programming in the classical sense. It is designed to operate based on its default settings, which can be adjusted through the rotary knobs for initial torque setting, ramp-up time, and ramp-down time.
Installation
The installation process for the 154-TP2C16NCD involves connecting the device to the motor and power supply according to the manufacturer's instructions. The device should be installed in a location that allows for proper airflow and meets the environmental requirements specified in the user manual.
Go to product