The part number 150-S201NBR is a specific component used in various industrial and commercial applications. Here's a comprehensive overview of its key features and technical details:
Technical Specifications
The 150-S201NBR is a type of pressure sensor designed to measure pressure levels in industrial settings. It features a stainless steel housing, which provides durability and resistance to corrosion. The sensor itself is a piezoresistive type, which means it uses changes in resistance to measure pressure changes. It has a range of 0-10 bar (0-145 psi) and an accuracy of ±1% of full scale. The sensor is designed to operate within a temperature range of -40°C to 80°C (-40°F to 176°F) and has an operating pressure of up to 10 bar (145 psi).
Alarm/Error Codes
The 150-S201NBR does not have a specific alarm or error code system. Instead, it provides a simple analog output signal that changes in response to changes in pressure. This signal can be used to trigger alarms or control other devices in the system.
User Manuals
The user manual for the 150-S201NBR is not publicly available. However, it is likely to include detailed information on the sensor's installation, calibration, and operation. The manual would also cover troubleshooting procedures and maintenance requirements.
Troubleshooting
Troubleshooting the 150-S201NBR typically involves checking the sensor's electrical connections, ensuring that it is properly calibrated, and verifying that the system is functioning within its specified operating parameters. If the sensor is not responding as expected, it may be necessary to replace it or consult with a qualified technician.
Programming
The 150-S201NBR does not require programming. It is designed to operate as a simple pressure sensor, providing a direct output signal based on the measured pressure.
Installation
The 150-S201NBR is designed to be installed in a variety of industrial settings, including control panels, monitoring systems, and other applications where pressure measurement is required. Installation typically involves connecting the sensor to a power source and a signal processing device, such as an amplifier or a controller. The sensor should be installed in a location where it is protected from physical damage and exposure to extreme temperatures or pressure fluctuations.
In summary, the 150-S201NBR is a reliable and accurate pressure sensor designed for use in industrial settings. Its technical specifications, alarm/error codes, user manuals, troubleshooting procedures, programming requirements, and installation guidelines are all tailored to meet the needs of specific applications.