The Bulletin 150 Smart Motor Controller
The Bulletin 150 Smart Motor Controller, specifically the model 150-A180NBD-8L4, is a solid-state controller designed for use in industrial applications. It is part of the SMC PLUS series and is capable of handling a maximum of 180 amps. The controller is designed to operate in a variety of environments and can be used with a range of motor types and sizes.
Technical Specifications
- Power Rating: The controller is rated for 180 amps and can handle motors up to 150 horsepower at 480V or 150 horsepower at 600V.
- Voltage and Frequency: The controller operates on a voltage range of 200-480 volts and can handle both 50 and 60 Hz frequencies.
- Soft Stop: The controller features a soft stop function, which helps to reduce the impact of motor stoppage on the system.
- Protective Module: The controller includes a line-mounted protective module that provides additional protection against electrical faults.
Installation and Mounting
- Enclosure Type: The controller comes in an open enclosure type, which is suitable for most industrial environments.
- Dimensions: The controller's dimensions are approximately 10.75 inches wide, 22.063 inches tall, and 11.583 inches deep.
Wiring and Connection
- Wiring: The controller requires a separate 100-240V, 50/60 Hz single-phase control source. It also includes terminals for connecting a separate thermal overload relay to the control circuit.
- Heatsink Fan: The controller has a heatsink fan that is rated for 97-360 amps and requires a specific wiring configuration.
Troubleshooting and Error Codes
- Technical Support: For technical support on start-up or existing installations, contact your Allen-Bradley representative or call 1-800-765-SMCS (765-7627) for assistance.
- Error Codes: The user manual does not provide specific error codes for the controller. However, it does provide general troubleshooting guidelines and recommends consulting the Allen-Bradley representative for technical support.
User Manual and Programming
- User Manual: The user manual for the SMC Dialog Plus is available and provides detailed information on the controller's operation, installation, and troubleshooting.
- Programming: The controller does not appear to have specific programming requirements or instructions. However, it is designed to be used with a range of motor types and sizes, which may require specific programming configurations depending on the application.
Discontinuation Notice
- Discontinuation: The SMC PLUS 180 A Smart Motor Controller, including the 150-A180NBD model, was discontinued as of November 30, 2008. Customers are encouraged to remove references to the affected product and consider the 150-C201NBD as a functional replacement.