The part number 1489-M1C010 is a miniature circuit breaker designed for use in industrial applications. It is a UL489 certified product, which means it meets the safety standards set by Underwriters Laboratories for miniature circuit breakers. The product is designed to provide overcurrent protection in electrical circuits and is suitable for use in a variety of applications, including motor control and automation systems.
Technical Specifications
- Ratings: The circuit breaker is rated for 1 ampere (A) at a maximum voltage of 277 volts AC (Vac) and 48 volts DC.
- Trip Curve: The trip curve for this circuit breaker is of the Type C variety, which is a standard characteristic for UL489 certified products. This means that the breaker will trip at a current level that is between 5 and 10 times the rated current of the circuit breaker, with a reference temperature of 30°C.
- Environmental Conditions: The circuit breaker is designed to operate in a range of environmental conditions, including temperatures from -25°C to 55°C, and storage temperatures from -40°C to 70°C. It is also resistant to shock and vibration, with a rating of 25 g for shock and 5 g for vibration.
Alarm/Error Codes
The circuit breaker does not have specific alarm or error codes listed in the provided documentation. However, it is designed to trip automatically when an overcurrent condition is detected, which can be an indication of a fault or malfunction in the circuit.
User Manuals
The user manual for the 1489-M1C010 is not directly accessible through our research. However, the product documentation available from Rockwell Automation and other suppliers likely includes detailed instructions for installation, operation, and maintenance of the circuit breaker.
Troubleshooting
Troubleshooting for the 1489-M1C010 involves identifying the cause of an overcurrent condition that triggers the breaker to trip. This can involve checking the circuit for any signs of damage or wear, verifying that the breaker is properly installed and configured, and ensuring that the load on the circuit is within the rated capacity of the breaker.
Programming
The circuit breaker does not require programming as it is a simple overcurrent protection device. It is designed to operate automatically based on the detected current levels in the circuit.
Installation
The circuit breaker is designed to be installed on a DIN rail (EN 60715, 35mm) with a fast clip, allowing for easy mounting and connection to the circuit. The breaker is rated for use in a variety of applications, including motor control and automation systems, and should be installed according to the manufacturer's instructions and local electrical codes.
Go to product