Technical Specifications
- Type: Module, Control
- Volts DC: 24
- Wattage: 30
Alarm/Error Codes
The documentation provided does not contain specific information on alarm or error codes for this product. For detailed information on error codes or troubleshooting, it is recommended to consult the user manual or contact the manufacturer's support directly.
User Manual
The user manual for the 1407-CGCM-DLR is available in PDF format from Rockwell Automation. The manual provides detailed information on the module's operation, installation, and troubleshooting procedures.
Troubleshooting
Troubleshooting procedures for the 1407-CGCM-DLR are outlined in the user manual. These procedures cover common issues such as communication errors, power supply issues, and faulty sensor readings. For more complex problems or those that are not addressed in the manual, it is recommended to contact the manufacturer's support team.
Programming
The programming of the 1407-CGCM-DLR is typically done through the ControlLogix Automation Controller, which is a part of the Rockwell Automation ControlLogix family of programmable automation controllers. The programming process involves using the ControlLogix programming software, such as RSLogix 5000, to configure the module's settings and logic according to the specific application requirements.
Installation
The 1407-CGCM-DLR is designed to be installed in a Pollution Degree 2 Industrial Environment, in overvoltage Category II applications. The unit must be mounted vertically to ensure proper heat dissipation, as it contains a heat sink. Clearance requirements for the unit include 63.5 mm (2.5 in.) on both sides and 101.6 mm (4 in.) above and below the unit when mounted. The unit must be installed in an enclosure, and all cables connected to it must remain within the enclosure or be protected by conduit or other means. All wiring must comply with N.E.C. article 501-4(b).
Go to product