The Allen-Bradley 1305-AA08A is a variable speed AC drive designed for use in industrial automation systems. It is part of the 1305 AC Drive series and is rated for use in applications with a maximum power of 2 HP (1.5 kW) and a voltage range of 200-240V single phase or 200-230V three phase. The drive is housed in an IP 30 (NEMA Type 1) enclosure, which provides protection against solid objects and water.
The technical specifications of the 1305-AA08A include a nominal current rating of 8 A and an output current rating of 1.5 kW. It is designed to operate in a variety of environments and is UL and cUL listed, as well as CSA certified, as a motor overload protective device.
The drive is equipped with a human interface module (HIM) that allows for easy configuration and monitoring of the drive's settings. The HIM can be ordered in different configurations, including analog speed pots and digital up-down keys.
For troubleshooting and fault information, the drive's user manual provides detailed information on troubleshooting and fault diagnosis. This includes a block diagram and specifications appendix, as well as sections on serial communications and drive accessories.
The installation and wiring of the 1305-AA08A require careful attention to detail and adherence to safety guidelines. The user manual emphasizes the importance of following installation and wiring instructions, as well as applicable codes, laws, and standards. Additionally, the drive is designed to be installed by suitably trained personnel in accordance with applicable code of practice.
The drive's programming is typically done using a HAP (Human-Machine Interface) programmer, which allows for configuration of the drive's settings and parameters. The drive's firmware version is 6.01 and up, and important user information is provided in the user manual.
In summary, the Allen-Bradley 1305-AA08A is a variable speed AC drive designed for use in industrial automation systems. It is rated for use in applications with a maximum power of 2 HP (1.5 kW) and a voltage range of 200-240V single phase or 200-230V three phase. The drive is housed in an IP 30 (NEMA Type 1) enclosure and is designed to operate in a variety of environments. It is equipped with a human interface module for easy configuration and monitoring, and its installation and wiring require careful attention to detail and adherence to safety guidelines.