Part Number 2198-BARCON-85DCAC100
The part number 2198-BARCON-85DCAC100 is a shared-bus connector kit designed for use in Kinetix 5700 multi-axis servo drive systems. It consists of 85mm bus bars, with a quantity of eight, and is intended for installation in the DC-bus power supply or capacitor module. The kit is used to create a new 24V control bus when the maximum current value is reached in the drive system.
Technical Specifications
The technical specifications for this part number are not explicitly mentioned in our research. However, the kit is designed for use in Kinetix 5700 multi-axis servo drive systems, which suggests that it is compatible with these systems and operates within their technical specifications.
Alarm/Error Codes
No information on alarm or error codes specific to this part number is available in our research.
User Manuals
The user manual for the Kinetix 5700 Servo Drives, publication 2198-UM002, is mentioned in our research. This manual likely provides detailed information on the installation, operation, and troubleshooting of the servo drives, including the shared-bus connector kits.
Troubleshooting
Troubleshooting information for this part number is not explicitly mentioned in our research. However, the installation instructions provided in our research suggest that the kit should be installed according to the manufacturer's guidelines to ensure proper operation.
Programming
No information on programming specific to this part number is available in our research.
Installation
The installation instructions for the shared-bus connector kits are provided in our research. These instructions indicate that the kit should be installed in the DC-bus power supply or capacitor module, and that the input wiring connector can be inserted into any drive (mid-stream in the drive system) to begin a new 24V control bus when the maximum current value is reached.
Go to product