The Rockwell Automation 20P41AB7P0RA0NNN is a PowerFlex DC Drive designed for industrial applications. It operates at 240 VAC, 3-phase, with a maximum current of 7 amps and a power rating of 1.5 HP. The drive features an open/IP20 enclosure and is designed with a conformal coating for protection against environmental factors. It does not include a Human Machine Interface (HIM), instead featuring a blank plate.
Technical Specifications
- Voltage: 240 VAC (208 VAC)
- Phase: 3
- Current: 7 amps
- Power: 1.5 HP
- Enclosure: Open/IP20
- Coating: Conformal
- HIM: Blank Plate
Alarm/Error Codes
The specific alarm and error codes for this drive are not publicly available. For detailed information on error codes and troubleshooting, it is recommended to consult the user manual or contact Rockwell Automation support.
User Manuals
The user manual for the Rockwell Automation 20P41AB7P0RA0NNN PowerFlex DC Drive is available from various sources. It provides detailed information on installation, operation, and troubleshooting of the drive.
Troubleshooting
Troubleshooting for this drive is typically done by checking the drive's power supply, motor connections, and configuration settings. The user manual provides detailed troubleshooting procedures and error code explanations. If issues persist, it is recommended to contact Rockwell Automation support for further assistance.
Programming
The programming of the Rockwell Automation 20P41AB7P0RA0NNN PowerFlex DC Drive is typically done using Rockwell's programming software, such as RSLogix 5000 or RSLogix 500. These software tools allow users to configure the drive's settings, set up motor control, and monitor drive performance.
Installation
The installation of the Rockwell Automation 20P41AB7P0RA0NNN PowerFlex DC Drive typically involves connecting the drive to a power source, connecting the motor to the drive, and configuring the drive's settings using the programming software. The user manual provides detailed installation instructions and safety precautions.
Go to product