Envoi gratuit pour toutes les commandes!

sales@chiefautomation.com
(877) 629-8191

How to Configure Your PanelView Plus 6 Terminals: Step-by-Step Guide

Configuring the PanelView Plus 6 Terminals

The PanelView Plus 6 Terminals are a critical component in industrial Human-Machine Interface (HMI) applications. This guide provides comprehensive instructions on accessing configuration mode, modifying terminal settings, and loading as well as running HMI applications. It also covers start-up options and enabling desktop access for advanced configurations. Below are the steps necessary for configuring your PanelView Plus 6 Terminal.

Accessing Configuration Mode

To initiate the configuration process, you need to enter the Configuration Mode. This can be accomplished during the terminal's power-up sequence. Here are the steps to follow:

  1. Turn on the terminal.
  2. Press and hold down the white square in the lower right corner of the screen.
  3. The Configuration Mode Menu will appear.

In Configuration Mode, you'll have access to a suite of tools and settings necessary for setting up and managing your device.

The Configuration Mode Menu

The Configuration Mode Menu provides several important options:

  • Terminal Settings: Modify system settings such as display calibration, network settings, and system information.
  • Load and Run Application: Upload HMI applications to the terminal and execute them.
  • Select Application: Choose which application you want to load at startup.
  • Terminal Network Setup: Configure the terminal for different network protocols, like Remote I/O, Data Highway Plus (DH+), and ControlNet.
  • Application Security: Set up security options to control access to specific applications or functions.
  • Setting Time and Date: Ensure the terminal’s internal clock is accurate for time-stamped data.

Modifying Terminal Settings

To modify your terminal settings:

  1. In the Configuration Mode Menu, select "Terminal Settings."
  2. Navigate through the options to make necessary adjustments. This can include changing the backlight settings, adjusting the volume, or setting up network configurations like IP addresses and subnet masks.
  3. Save your changes and exit the menu.

Loading and Running HMI Applications

To load and run an HMI application on your PanelView Plus 6 Terminal:

  1. Connect a USB drive containing the application file to the terminal.
  2. From the Configuration Mode Menu, select "Load and Run Application."
  3. Browse the file system to locate and select the HMI application file.
  4. After selecting the file, the application will be loaded into the terminal’s memory.
  5. Once the upload is complete, you can run the application by selecting it from the "Select Application" option in the menu.

Start-up Options

The PanelView Plus 6 Terminals offer flexible start-up options to fit different use cases:

  1. Disable FactoryTalk View ME Station Software on Startup: Choose this option if you do not want the FactoryTalk View ME Station software to run automatically when the terminal starts up.
  2. Enter Configuration Mode on Startup: This option will boot the terminal directly into Configuration Mode, giving you immediate access to the configuration settings.
  3. Run the Loaded Application on Startup: Opt to have a specific HMI application run automatically upon startup, ensuring that the terminal is ready for operation immediately after booting up.

Enabling Desktop Access

For advanced configurations and debugging, you may need desktop access. Here’s how to enable it:

  1. Access the Configuration Mode Menu.
  2. Select "Terminal Settings" followed by "Desktop Access."
  3. Enable the desktop access option. This will allow you to exit the HMI runtime interface and access the Windows CE desktop.

Desktop access offers several advantages, including the ability to run diagnostics, install patches, or use third-party tools directly on the terminal.

By following these steps and utilizing the Configuration Mode effectively, you can enhance the functionality, performance, and reliability of your PanelView Plus 6 Terminal. Proper configuration is essential for ensuring that your HMI applications run smoothly and effectively within your industrial environment.