The Siemens part number 6SL3244-0BB13-1PA0 is associated with the SINAMICS G120 CU240E-2 DP-F Control Unit, which is part of the SINAMICS G120 frequency converter family. This control unit is designed for precise and cost-effective speed/torque control of three-phase motors. It supports various communication protocols, including PROFINET and PROFIBUS.
Technical Specifications
- The control unit supports PROFINET and PROFIBUS communication protocols.
- It has a maximum permissible cable length of 100 meters for data transfer rates of 1 Mbit/s on PROFIBUS.
- The control unit supports a range of inputs and outputs, including 6 DI, 3 DQ, 2 AI, 2 AQ.
Alarm/Error Codes
The control unit provides diagnostic functionality, allowing it to transmit fault and alarm messages to higher-level controls. This functionality must be selected and activated in the higher-level control.
User Manuals
The user manual for this control unit is not directly accessible through the provided search results. However, it is likely that the manual can be accessed through Siemens' official support website or by contacting their customer support directly.
Troubleshooting
Troubleshooting procedures for this control unit are not explicitly detailed in the provided search results. However, troubleshooting guides and technical support resources are likely available through Siemens' official support website or by contacting their customer support directly.
Programming
The control unit requires configuration and programming for its various functions. This includes setting up the device file for PROFINET communication and configuring the fieldbus. The GSDML file for the inverter must be loaded into the PROFINET controller for communication setup.
Installation
The control unit must be installed with a power supply of 24 V DC at terminals 31 and 32 to maintain communication with the control system. In the event of short interruptions in the 24 V voltage supply, the inverter may report a fault without interrupting communication with the controller.