The Allen-Bradley VPL-B1652F-CK12AA is a Kinetix VP Low Inertia Servo Motor designed by Rockwell Automation. It features a 165mm bolt circle frame size, an IEC metric mounting flange, and a rated speed of 4500 RPM. This motor is designed for high-performance applications that require precise control and quick response times.
Technical Specifications
- Frame Size: 165mm Bolt Circle Frame Size
- Mounting: IEC Metric Mounting Flange
- Rated Speed: F Winding, 4500 RPM
- Voltage Class: 480V AC
- Feedback: 18-bit Single-turn Digital High Resolution Encoder
- Shaft Extension: Keyless Shaft
- Stack Length: 2 (Two) Magnet Stacks
- Connectors: SpeedTec Right Angle DIN Connector, 325° rotatable
- Brake Option: No Holding Brake
- Factory Options: Standard
Environmental Specifications
The motor's environmental specifications are detailed in the provided specification sheet. It does not provide information on the IP rating, but it is recommended to refer to the Environmental Specifications section in the specification sheet for a brief description of the IP rating.
User Manuals
The user manual for the VPL-B1652F-CK12AA is available in PDF format through the Rockwell Automation website. The manual provides detailed information on the motor's operation, installation, and troubleshooting procedures.
Troubleshooting
Troubleshooting procedures for the VPL-B1652F-CK12AA are detailed in the user manual and specification sheet. These documents provide guidelines for identifying and resolving common issues that may arise during the motor's operation.
Programming
The programming of the VPL-B1652F-CK12AA involves configuring the motor's parameters using the Kinetix VP Low Inertia Servo Motor software. This software is designed to optimize the motor's performance and ensure precise control. The specific programming steps and procedures are detailed in the user manual and specification sheet.
Installation
The installation of the VPL-B1652F-CK12AA involves mounting the motor to a suitable frame and connecting it to the power supply and control systems. The motor should be installed in a well-ventilated area and away from sources of moisture and electrical interference. The installation procedures are detailed in the user manual and specification sheet.
Go to product