The Kinetix VPL-B1002E-CJ12AA is a low-inertia servo motor designed by Rockwell Automation. It belongs to the Kinetix VPL series, which is a line of servo motors known for their high performance and reliability. This specific motor is designed for use in industrial automation applications where precise control and high speed are required.
Technical Specifications
- Frame Size: 100 mm (Bolt Circle Diameter)
- Rated Speed: 3500 RPM
- Voltage: 480V AC
- Magnet Stacks: 2 (Two)
- Encoder: Single-turn
- Shaft Key: Keyed
- SpeedTec Connector: Right angle DIN connector, 325° rotatable
- Brake: No Brake
- Mounting Flange: Free mounting holes of type FF and IEC metric
- Factory Options: Standard, including shaft seal
Alarm/Error Codes
The Kinetix VPL-B1002E-CJ12AA servo motor does not have specific alarm or error codes listed in the provided documentation. However, the motor is designed to operate within a specific range of parameters, and any deviations from these parameters may trigger alarms or errors on the control system or drive connected to the motor. For detailed information on error codes and troubleshooting, refer to the documentation for the specific control system or drive used with this motor.
User Manuals
The user manual for the Kinetix VPL-B1002E-CJ12AA servo motor is not provided in our research. However, Rockwell Automation typically provides detailed documentation for their products, including user manuals, which can be accessed through their website or through authorized distributors.
Troubleshooting
Troubleshooting for the Kinetix VPL-B1002E-CJ12AA servo motor would involve identifying and addressing any issues related to its operation, such as motor speed, torque, or encoder errors. This would typically involve checking the motor's electrical connections, ensuring proper mounting and alignment, and verifying the control system or drive settings. For detailed troubleshooting procedures, refer to the documentation for the specific control system or drive used with this motor.
Programming
The Kinetix VPL-B1002E-CJ12AA servo motor is designed to be controlled by a control system or drive that supports the Kinetix VPL series. Programming for this motor would involve setting up the control system or drive to communicate with the motor and define its operating parameters, such as speed, torque, and position. This would typically involve using a programming language or software specific to the control system or drive, such as Rockwell Automation's RSLogix 5000 or Kinetix 5500 software.
Installation
The installation of the Kinetix VPL-B1002E-CJ12AA servo motor typically involves mounting it securely to a base or frame, connecting it to a control system or drive, and ensuring proper electrical connections. The motor should be installed in a location that provides adequate cooling and protection from environmental factors. For detailed installation instructions, refer to the documentation for the specific control system or drive used with this motor.
Go to product