The Allen-Bradley VPL-B0632T-WK14AS is a low inertia servo motor designed for high-performance applications. It features a 63mm bolt circle frame size, 480V AC power supply, and a rated speed of 6750 RPM. The motor has two magnet stacks and is equipped with a multi-turn encoder for precise position control. The shaft is keyless, and the motor is designed with a SpeedTec right angle DIN mount. Additionally, it includes a 24V DC holding brake and is fitted with an IEC metric mounting flange and IP66 shaft seal for protection against environmental factors.
Technical Specifications
- Power Supply: 480V AC
- Frame Size: 63mm bolt circle
- Rated Speed: 6750 RPM
- Magnet Stacks: 2
- Encoder: Multi-turn, 18-bit safety rated
- Shaft: Keyless
- Mounting: SpeedTec right angle DIN
- Holding Brake: 24V DC
- Mounting Flange: IEC metric
- Shaft Seal: IP66
Alarm/Error Codes
No specific information on alarm or error codes for this product was found in our research.
User Manuals
The user manual for the VPL-B0632T-WK14AS is not directly available online. However, Rockwell Automation provides installation instructions for the Kinetix VP Low Inertia Servo Motors, which includes information on the motor's configuration and setup.
Troubleshooting
Troubleshooting information for the VPL-B0632T-WK14AS is not readily available online. However, Rockwell Automation's technical support resources and documentation for the Kinetix VP Low Inertia Servo Motors may provide guidance on troubleshooting common issues.
Programming
No specific information on programming the VPL-B0632T-WK14AS was found in our research. Programming details are typically provided by the manufacturer or in the user manual, which was not directly available online.
Installation
The installation instructions for the Kinetix VP Low Inertia Servo Motors provide detailed information on the motor's installation, including mounting and wiring procedures.