The part number VPL-A1304D-CJ14AA is a Kinetix VPL Low-inertia Servo Motor, specifically designed for applications requiring high dynamic performance and precision control. This motor is part of the Kinetix VPL series, which is based on the proven Kinetix MPL servo motor technology for increased reliability and leverages high volume production for cost-effectiveness.
Technical Specifications
- Frame Size: 130mm Bolt Circle Frame Size
- Voltage: 240V AC
- Magnet Stacks: 4 (Four)
- Winding: D Winding
- Rated Speed: 3000 RPM
- Encoder: 18 bit Single-turn Digital High Resolution Encoder
- Shaft: Keyless Shaft
- Connector: Single SpeedTec Din Connector
- Holding Brake: 24V DC Holding Brake
- Shaft Seal: IP66 Shaft Seal Fitted
Alarm/Error Codes
No specific information on alarm or error codes for this motor is available from our research.
User Manuals
The user manuals for Kinetix VPL Low-inertia Servo Motors are available on the Rockwell Automation website. The manuals provide detailed information on the motor's operation, installation, and troubleshooting procedures.
Troubleshooting
Troubleshooting procedures for Kinetix VPL Low-inertia Servo Motors are outlined in the user manuals and technical documentation. These procedures cover common issues such as motor failure, encoder errors, and communication problems. For specific troubleshooting guidance, refer to the user manuals or contact Rockwell Automation support.
Programming
The programming of Kinetix VPL Low-inertia Servo Motors is typically done using the Kinetix 5700 Servo Drives, which are designed to work with the VPL motors. The programming process involves setting the motor's parameters, such as speed, torque, and acceleration, using the servo drive's programming software. For detailed information on programming the Kinetix 5700 Servo Drives, refer to the user manual or contact Rockwell Automation support.
Installation
The installation of Kinetix VPL Low-inertia Servo Motors typically involves mounting the motor to a suitable frame or base, connecting the motor to the servo drive, and configuring the motor's parameters using the servo drive's programming software. For detailed information on the installation process, refer to the user manual or contact Rockwell Automation support.
Go to product