The part number VPF-A1153C-CJ12AF is a component of the Kinetix VPF series, which includes food-grade servo motors. The VPF series is designed for use in applications where food-grade compliance is necessary, such as in the food processing and packaging industries. These motors are built with high-quality materials and are designed to withstand the rigors of continuous use in these environments.
Technical Specifications
The VPF-A1153C-CJ12AF motor has the following technical specifications:
- Rated Speed: 2300 rpm
- Continuous Stall Torque: 1.35 Nm (1.81 lb-in)
- Peak Stall Torque: Not specified
- Motor Frame Size: Not specified
- Encoder Option: Not specified
- Environmental Rating: IP66 with shaft seal and environmentally sealed cable connectors
- Certifications: UL Recognized components to applicable UL and CSA standards, CE marked for all applicable directives
Alarm and Error Codes
The VPF-A1153C-CJ12AF motor does not have specific alarm or error codes listed in the provided documentation. However, it is likely that the motor will have standard error codes and alarm signals that are typical of servo motors in the Kinetix series, such as those listed in the Kinetix Rotary and Linear Motion Cable Specifications document.
User Manual
The user manual for the VPF-A1153C-CJ12AF motor is not provided in our research. However, the Kinetix VPF Food-grade Servo Motors document provides general information on the motor's specifications and features, which can be useful for understanding the motor's operation and installation.
Troubleshooting
Troubleshooting for the VPF-A1153C-CJ12AF motor would typically involve checking the motor's power supply, motor speed, and encoder signals. The motor's specifications and performance can be checked against the motor's technical data sheet and the Kinetix VPF Food-grade Servo Motors document. If issues persist, it may be necessary to consult the motor's user manual or contact the manufacturer's support team.
Programming
The VPF-A1153C-CJ12AF motor is designed to be used with the Kinetix 5500 or 5700 drive system, which provides advanced motor control and programming capabilities. The motor can be programmed using the Kinetix Motion Analyzer software, which allows for precise control over motor speed, torque, and position.
Installation
The VPF-A1153C-CJ12AF motor should be installed according to the manufacturer's instructions and in compliance with local electrical and safety regulations. The motor's shaft seal kit should be inspected and replaced periodically to ensure proper motor operation and prevent damage. The motor's environmental rating of IP66 with shaft seal and environmentally sealed cable connectors ensures that it can operate in a variety of environments, including those with high levels of moisture or dust.
Go to product