The Allen-Bradley TLY-A220T-HK62AA is a TL-Series servo motor designed for use in industrial automation applications. It operates at 240V AC and features a low-inertia design, making it suitable for high-speed and high-precision applications. The motor has a frame size of 2, which corresponds to 70 mm (2.75 in.) or NEMA 23, and a magnet stack length of 20. It operates at a maximum speed of 6000 RPM and includes an incremental encoder with 2000 lines per revolution for precise position control. The motor's housing is rated IP65, indicating it is dust-resistant and protected against water jets, but it does not have a shaft key or shaft seal. The motor comes with cables featuring circular connectors and a standard length of 1 m (39.4 in.).
Technical Specifications
- Voltage: 240V AC
- Frame Size: 2 (70 mm or NEMA 23)
- Magnet Stack Length: 20
- Maximum Speed: 6000 RPM
- Encoder: Incremental (2000 lines/revolution)
- Housing Rating: IP65 (dust-resistant and water-resistant)
- Shaft Key/Seal: No
- Cable Length: 1 m (39.4 in.) with circular connectors.
Alarm/Error Codes
No specific information on alarm or error codes for this motor was found in our research. It is recommended to consult the user manual or contact the manufacturer for detailed information on error handling and troubleshooting procedures.
User Manuals
The user manual for the TLY-A220T-HK62AA is not directly accessible through our research. However, it is likely that the manual is available from the manufacturer or through authorized distributors. It is recommended to contact the manufacturer or a supplier for access to the manual.
Troubleshooting
Troubleshooting procedures for the TLY-A220T-HK62AA are not explicitly detailed in our research. However, the user manual and manufacturer's documentation should provide detailed guidance on troubleshooting and error handling. It is recommended to consult these resources or contact the manufacturer for assistance with troubleshooting.
Programming
No specific information on programming the TLY-A220T-HK62AA was found in our research. The motor is designed to be used with a control system, and programming would typically be done through the control system's interface. It is recommended to consult the control system's documentation and the manufacturer's documentation for the motor for detailed information on programming.
Installation
The installation instructions for the TLY-A220T-HK62AA are provided in the publication TL-IN003A-EN-P from Rockwell Automation. This document covers the installation procedures for the TL-Series motors, including the TLY-A220T-HK62AA. It is recommended to follow the instructions carefully to ensure proper installation and to avoid potential issues.
Go to product