The DUT-0600-6-0-P is a filter designed by Eaton Electric for use in Vacon NX drives. It is a dU/dt filter, which is used to protect the drive from voltage spikes and other electrical disturbances. The filter is designed to operate within a voltage range of 200-690V AC and has a continuous current rating of 600A.
The filter's dimensions are not explicitly mentioned in our research, but it is part of a range of filters that includes dimensions up to 2200mm x 600mm x 600mm (HxWxD) for all dU/dt filters up to 600A with or without a drive in an enclosure.
The filter's weight is listed as 76 kg, and its gross weight is also 76 kg. It is designed to operate in an environment with an IP00 rating, indicating that it is not designed to be used in environments where it may be exposed to water or other contaminants.
The filter's losses are not specified in our research, but it is part of a range of filters that includes information on losses for each specific filter type.
The filter's connections and losses are not detailed in our research, but it is designed to be used in conjunction with other components in a Vacon NX drive system.
The filter's alarm and error codes are not specified in our research, as they are likely to be specific to the Vacon NX drive system and not the filter itself.
The user manual for the Vacon NX drive system, which includes the DUT-0600-6-0-P filter, is available but not directly linked in our research. The manual provides detailed information on the installation, operation, and troubleshooting of the drive system, including the filter.
Troubleshooting for the DUT-0600-6-0-P filter would likely involve checking the filter's connections and ensuring that it is properly installed and configured within the Vacon NX drive system. The user manual for the drive system would provide detailed guidance on troubleshooting and resolving any issues that may arise.
The filter can be programmed using the Vacon NX drive system's programming interface, which allows users to customize the drive's operation and configure the filter settings. The user manual for the drive system provides detailed information on programming and configuring the drive.
The installation of the DUT-0600-6-0-P filter would typically involve mounting it within the Vacon NX drive system enclosure, connecting it to the drive's electrical connections, and ensuring that it is properly configured and set up. The user manual for the drive system provides detailed guidance on installation and setup.
Go to product