The part number 700-HN116 is a relay socket designed for use with Allen-Bradley (Rockwell Automation) 700-HF 2-pole relays. It features guarded screw terminals and is intended for panel mounting. The socket is designed to provide a secure and reliable connection for the relay contacts, ensuring proper electrical isolation and minimizing the risk of electrical shock or other safety hazards.
Technical Specifications
- Dimensions: The socket measures 38.0 mm (1-1/2 inches) in length, 30.0 mm (1-3/16 inches) in width, and 26.0 mm (1-1/32 inches) in height.
- Panel Mounting: The socket is designed for panel mounting, allowing for easy installation and secure fastening to a control panel or enclosure.
- Wire Size: The socket supports wire sizes up to #12 AWG (American Wire Gauge) for single wire connections and up to #2 AWG for double wire connections.
- Strip Length: The wire strip length is 9 mm (3/8 inches), and the recommended torque for securing the wires is 0.8 N•m (7 lb•in).
- Contact Rating: The socket is designed for use with 2-pole relays, supporting a contact rating of 12A at 6V DC, 8A at 12V DC, and 6A at 24V DC.
Alarm/Error Codes
There are no specific alarm or error codes associated with the 700-HN116 relay socket, as it is a mechanical component that does not generate electrical signals or errors. Any issues with the socket would likely be related to physical damage or improper installation, which would not trigger error codes.
User Manuals
The user manual for the 700-HN116 relay socket is not explicitly provided in our research. However, the technical specifications and installation instructions are detailed in the documentation available from Rockwell Automation and other sources.
Troubleshooting
Troubleshooting for the 700-HN116 relay socket primarily involves ensuring proper installation and connection of the relay and wires. If issues arise, it is recommended to consult the technical specifications and installation instructions or contact the manufacturer's support team for assistance.
Programming
The 700-HN116 relay socket does not require programming as it is a mechanical component designed for use with Allen-Bradley (Rockwell Automation) 700-HF 2-pole relays. The relay itself is programmed through the control system or programming software, not through the socket.
Installation
The installation of the 700-HN116 relay socket involves mounting it to a control panel or enclosure using the provided screws and ensuring proper wire connections to the relay. The socket should be securely fastened to prevent damage or disconnection during operation.
Go to product