The Siemens part number 6SE6440-2UD31-1CA1 is a spare part for the MICROMASTER 440 drive, which is a type of industrial drive designed for constant torque applications. Here's a breakdown of the key aspects of this part:
Technical Specifications:- Operating voltage: 380-480 V AC
- Operating frequency: 47-63 Hz
- Constant torque: 11 kW
- Overload capacity:
- 150% for 60 seconds
- 200% for 3 seconds
- Square-law torque: 15 kW
- Ambient temperature: -10 to +50°C
- Protection: IP20
- Dimensions: 245 x 185 x 195 mm (H x W x D)
No specific information on alarm or error codes is available for this part number.
User Manuals:No user manuals are available directly from the provided search results. However, these manuals can be obtained from the official Siemens website or through authorized Siemens distributors.
Troubleshooting:Troubleshooting information for this part number is not directly available from the search results. It is recommended to consult the user manual or contact Siemens support for specific troubleshooting guidance.
Programming:No programming information is available for this part number. The MICROMASTER 440 drive is likely to be programmed using Siemens' SIMATIC software, but detailed information on programming the specific part number is not provided.
Installation:No detailed installation instructions are available for this part number. Installation typically involves mounting the drive in a suitable location, connecting power and control cables, and configuring the drive according to the application requirements. For specific installation details, refer to the user manual or consult Siemens support.