The part number 440S-S540001 is an accessory, specifically a Sigma Lever, designed for use with the 440S Series. It is a non-contact switch lever that does not require physical contact to operate, making it suitable for applications where contamination or wear and tear could affect the performance of traditional contact switches.
Technical Specifications
The technical specifications of the 440S-S540001 Sigma Lever are not explicitly mentioned in our research. However, the general specifications for the 440S Series, which this accessory is designed for, can be found in the documentation provided by Rockwell Automation. These specifications include dimensions, mounting information, and torque specifications for the mounting hardware and connector.
Alarm/Error Codes
No information on alarm or error codes for the 440S-S540001 Sigma Lever is available in our research. This information is typically specific to the system or device that the accessory is integrated into, rather than the accessory itself.
User Manuals
The user manual for the 440S-S540001 Sigma Lever is not directly available in our research. However, user manuals for the 440S Series, which this accessory is designed for, can be found on the Rockwell Automation website. These manuals provide detailed information on the installation, operation, and troubleshooting of the series.
Troubleshooting
Troubleshooting information for the 440S-S540001 Sigma Lever is not explicitly mentioned in our research. However, troubleshooting guides for the 440S Series can be found on the Rockwell Automation website. These guides provide step-by-step procedures for identifying and resolving common issues with the series.
Programming
The 440S-S540001 Sigma Lever is an accessory and does not require programming. It is designed to be used with the 440S Series, which is a line of limit switches that can be programmed for specific applications.
Installation
The installation of the 440S-S540001 Sigma Lever is detailed in the documentation provided by Rockwell Automation. The lever should be mounted according to the manufacturer's instructions, ensuring that the recommended fastener size (M5) and torque specification (2.20 N•m or 19.95 in•lb) are followed to avoid damage to the component.
Go to product