The part number 2198-H2DCK is a converter kit designed for use with Rockwell Automation's Kinetix 5700, 5500, 5300, and 5100 Servo Drives. This kit is used to convert feedback signals from a motor or actuator to a format compatible with the servo drives. It is designed to be used with the Universal Feedback Kit in UFB Connector (2198-Dxxx-ERSx) or the Feedback Kit in MF Connector (2198-KITCON-DSL).
Technical Specifications
- Power Supply: The converter kit does not have its own power supply. Instead, it relies on the power supply provided by the servo drive, which is specified to operate within a range of 195-528V rms, three-phase (240/480V nom), with an AC input frequency of 47-63 Hz.
Alarm/Error Codes
- Error Codes: The converter kit does not have its own error codes. Any errors or issues would likely be reported through the servo drive's error codes, which are detailed in the user manual.
User Manuals
- User Manual: The user manual for the Kinetix 5500 Servo Drives, which includes information on the converter kit, is available online.
Troubleshooting
- Troubleshooting: Troubleshooting for the converter kit would likely involve checking the servo drive's error codes and ensuring that the feedback signals are properly configured and connected. The user manual provides detailed instructions on how to troubleshoot common issues with the servo drives.
Programming
- Programming: The converter kit does not have its own programming capabilities. Any programming or configuration would need to be done through the servo drive's programming interface, which is detailed in the user manual.
Installation
- Installation: The converter kit is designed to be installed with the Universal Feedback Kit in UFB Connector (2198-Dxxx-ERSx) or the Feedback Kit in MF Connector (2198-KITCON-DSL). The installation process is detailed in the user manual.