The Rockwell Automation part number 2090-XXNFLT-S30 is a TL-Series 30-meter length feedback cable designed for use with Allen-Bradley drives. It is a feedback cable used for monitoring and controlling the position and speed of a motor or other mechanical device in industrial automation systems. The cable is designed to provide a reliable and accurate feedback signal to the drive, ensuring precise control and monitoring of the motor's operation.
Technical Specifications
The technical specifications of the 2090-XXNFLT-S30 feedback cable include:
- Length: 30 meters
- Cable type: Feedback cable
- Connector type: DIN Type 4 connector
- Cable material: Not specified
- Shielding: 360° shield-to-ground connection
- Wire gauge: 22 AWG
- Wire insulation: Heatshrink insulation for wire-to-wire connections
- Motor connector: Shielded 360° backshell
- Twisted pairing of wires: For noise reduction and signal integrity
- Customer requirements: 360° shield-to-ground connection and twisted pairing of wires.
Alarm/Error Codes
The 2090-XXNFLT-S30 feedback cable does not have alarm or error codes associated with it. It is a physical component used for transmitting feedback signals and does not have any built-in error detection or reporting capabilities.
User Manuals
The user manual for the 2090-XXNFLT-S30 feedback cable is not available separately. However, it is part of the larger documentation package provided by Rockwell Automation for their Allen-Bradley drives and control systems. This documentation includes installation guides, operation manuals, and troubleshooting guides that cover the use and configuration of the feedback cable.
Troubleshooting
Troubleshooting for the 2090-XXNFLT-S30 feedback cable typically involves checking the cable's physical connections, ensuring that the 360° shield-to-ground connection is secure and the twisted pairing of wires is correct. Additionally, the user should verify that the cable is properly terminated at both ends and that there are no signs of damage or wear that could affect the signal quality.
Programming
The 2090-XXNFLT-S30 feedback cable does not require programming. It is a passive component that simply transmits the feedback signal from the motor or mechanical device to the drive. The programming of the drive and control system is typically done using software tools provided by Rockwell Automation, such as the Rockwell Software Studio 5000 or the Rockwell Software RSLogix 5000.
Installation
The installation of the 2090-XXNFLT-S30 feedback cable involves connecting it to the Allen-Bradley drive and the motor or mechanical device. The cable should be securely fastened to prevent damage or disconnection during operation. The user should also ensure that the cable is properly terminated at both ends and that there are no signs of damage or wear that could affect the signal quality.
Go to product