The part number 2090-K6CK-KENDAT is a low-profile feedback module designed for use with Kinetix 6000 drives and compatible motors equipped with EnDat encoders. This module enables the operation of drives with EnDat feedback, providing a reliable and precise method of monitoring motor position and speed.
Technical Specifications
- Dimensions: The module measures 20 mm (0.8 in) in height, 61 mm (2.4 in) in length, and 19 mm (0.75 in) in width.
- Connector Type: The module features a 15-pin male D-sub connector.
- Compatibility: It is designed for use with Kinetix 7000 drives and compatible motors with EnDat encoders.
Alarm/Error Codes
No specific information on alarm or error codes for this part number was found in our research.
User Manuals
The user manual for this part number is not explicitly mentioned in our research. However, it is likely that the user manual would provide detailed instructions on installation, configuration, and troubleshooting of the module.
Troubleshooting
Troubleshooting information for this part number was not explicitly mentioned in our research. However, general troubleshooting procedures for similar products, such as the Kinetix 6000 drives, may be applicable.
Programming
No specific information on programming for this part number was found in our research. However, programming for Kinetix 6000 drives and compatible motors with EnDat encoders would likely involve configuring the drive and motor settings to work with the EnDat feedback module.
Installation
The installation instructions for this part number are outlined in Rockwell Automation Publication 2090-IN020C-EN-P, which provides detailed guidelines for installing the low-profile EnDat Feedback Module. The module should be installed according to the manufacturer's instructions to ensure proper function and prevent damage to the drive or motor.
Go to product