The part number 2090-CSWM1DG-18AA40 is a Kinetix Single Cable, specifically designed for the K5500 series, with a 40-meter length. This cable is used for single motor power and feedback applications. It features a 18 AWG wire gauge, TPE (thermoplastic elastomer) insulation, and a non-flexible construction. The cable is designed for use with the SpeedTec DIN connector at the motor end and a flying lead at the drive end.
The cable specifications include:
- Construction: The cable has an outer diameter of approximately 15 mm, with a core color of green/yellow. It is 40 meters long and has a drive-end connector type of flying lead, optimized for the Kinetix 5500 or Kinetix 5700. The cable has eight cores, with a protective conductor, and the core identification is by color.
- Electrical: The cable has an AWG size of 18, a nominal voltage of 1000 V, and is designed for single motor power only. It features a low capacitance design to maximize system power density and has a TPE jacket with mechanical and chemical properties.
- Mechanical: The cable has a nominal cross-section conductor of 0.82 mm², which is equivalent to 1.62 kcmil. It has a standard, non-flexible construction and a weight of approximately 0.136 kg/m. The cable features a tinned copper braid with aluminum/polyester insulation.
- Environmental: The cable has a maximum conductor temperature of 105°C.
For installation and troubleshooting, the user manual provides detailed instructions and guidelines. The manual covers topics such as cable selection, installation, and maintenance. It also includes troubleshooting procedures for common issues and error codes.
The technical specifications and user manual for this product are available through the Rockwell Automation website, along with other relevant documentation.
Go to product