The Allen-Bradley 2090-CSWM1DE-14AA34 is a Kinetix Single Cable designed for use with Kinetix 5700 servo drives. It is a 14 AWG, standard, non-flexible cable with a length of 34 meters. This cable is designed for single motor power only and features a drive-end connector type of drive-end, flying-leads with a factory pre-installed connector kit optimized for Kinetix 5700.
Technical Specifications
-
Construction:
- Outer diameter: approximately 17 mm
- Core color: Green/Yellow
- Cable length: 20 meters
- Drive-end connector type: Drive-end, flying-leads with factory pre-installed connector kit (optimized for Kinetix 5700)
- Number of cores: 8
- With protective conductor: Yes
- Core identification: Color
- Colour outer sheath: Orange
- Conductor material: Copper
- Conductor surface: Tinned
- Color cable code: RAL2003
- Core color: White/Blue
- Motor-end connector type: Single speedTec DIN connector
-
Electrical:
- AWG size: 14
- Nominal voltage U: 1000 V
- Cable type: Single motor power only
- Cable description: Power only: 1000V hybrid cable with four power and two feedback (digital communication) conductors
-
Mechanical:
- Nominal cross section conductor: 2.08 mm²
- Nominal cross section conductor (AWG): 4.1 kcmil
- Cable style: Standard, non-flexible
- Weight, approx: Standard (non-flex), power wire: 0.185 kg/m
- Twisted cores: No
- Accessory component: Cable
- Static bend radius: Standard (non-flex) and continuous flex: 7 times the cable diameter
- Features: Low capacitance design to maximize system power density, speedtec connection system, encoder communication data pair with noise rejection, TPE jacket with mechanical and chemical properties, cable features overall tinned copper braid with aluminum/polyester insulation
-
Environmental:
- Max. conductor temperature: 105 °C
Documentation
- Technical Data: KNX-TD004
This product is designed for use with Kinetix 5700 servo drives and is a standard, non-flexible cable with a length of 34 meters. It features a drive-end connector type of drive-end, flying-leads with a factory pre-installed connector kit optimized for Kinetix 5700. The cable is designed for single motor power only and has a nominal voltage of 1000 V.
Go to product