The part number 2090-CSWM1DE-14AA19 is a Kinetix cable, specifically designed for use with Allen-Bradley servo motors and actuators. It is a single DSL cable from the 2090 series, designed for power and feedback applications. The cable features a non-flexible TPE jacket with a tinned copper braid and an aluminum/polyester shield for enhanced durability and resistance to environmental factors.
Technical Specifications
- Construction: The cable has an outer diameter of approximately 17 mm, with a core color of green/yellow. It is 12 meters long and features a drive-end connector type optimized for Kinetix 5700 drives.
- Electrical: The cable is rated for 1000 volts and has an AWG size of 14. It is designed for single motor power only and features four power conductors and two feedback conductors for digital communication.
- Mechanical: The cable has a nominal cross-section conductor of 2.08 mm² and a nominal cross-section conductor in AWG of 4.1 kcmil. It is a standard, non-flexible cable with a static bend radius of 7 times the cable diameter.
- Environmental: The cable is designed to operate in environments with a maximum conductor temperature of 105°C.
Documentation
The product documentation includes technical data and installation instructions. The technical data is available under publication number KNX-TD004, which can be accessed through the Literature Library results on the Rockwell Automation website. The installation instructions are detailed in the 2090-Series Single Motor Cables Installation Instructions, which covers various aspects of installation, including cable pinouts and specifications.
Troubleshooting and Programming
Troubleshooting and programming for this cable are typically handled through the drive system and motor control units. The cable itself does not require specific troubleshooting or programming, as it is designed to be a simple, plug-and-play component in the overall system. Any issues with the cable would likely be related to physical damage or improper installation, which would need to be addressed through standard troubleshooting procedures for electrical cables.
Installation
Installation of the cable involves connecting it to the servo motor or actuator and the drive system. The cable should be secured properly to prevent damage or exposure to environmental factors. The installation instructions provided by Rockwell Automation cover the necessary steps for connecting the cable to the drive system and motor, as well as any specific requirements for the type of motor or application.
Go to product