The part number 2090-CSBM1DG-18AA01 is a cable designed for use with Kinetix 5500 or Kinetix 5700 servo drives. It is a standard, non-flexible cable with a wire gauge size of 18 AWG and is made of TPE (thermoplastic elastomer) material. This cable is designed for single motor power and feedback applications with brake wires. It is available in various lengths, ranging from 1.0 m (3.3 ft) to 90 m (294 ft) in increments of 1.0 m (3.3 ft).
The cable is designed to meet the requirements of motor brake circuits on Kinetix 5700 servo drive systems and is available in two series: series A and series B. Series A cables are designed for applications with cable lengths from 1.0 m (3.3 ft) to 50 m (164 ft), while series B cables are designed for applications with cable lengths from 51 m (167 ft) to 90 m (294 ft).
The cable's specifications include a continuous bend radius of 150 mm (5.9 in.) and an expected flex cycle at the rated radius of 10 million. It is designed to withstand the demands of continuous flexing and is suitable for use in a variety of industrial applications.
The cable's power and feedback conductors are designed to provide reliable communication between the motor and the drive system. The brake conductors are designed to ensure safe and controlled braking of the motor. The cable's insulation and shielding are designed to protect the conductors from electrical interference and to ensure reliable operation in harsh industrial environments.
The user manual for this cable is not directly available from our research. However, it is likely that the user manual would provide detailed information on the installation, operation, and maintenance of the cable, as well as troubleshooting procedures and safety precautions.
Troubleshooting for this cable would likely involve checking the cable's connections, ensuring that the cable is properly secured and not damaged, and verifying that the cable is compatible with the drive system and motor. If issues persist, it may be necessary to consult the user manual or contact the manufacturer for further assistance.
The cable can be programmed using the Kinetix 5500 or Kinetix 5700 servo drives, which are designed to provide precise control over the motor's speed and position. The drives can be programmed using a variety of programming languages and tools, including Rockwell Automation's RSLogix 5000 software.
The installation of this cable typically involves connecting the cable to the motor and drive system, ensuring that all connections are secure and not damaged. The cable should be routed in a way that minimizes bending and stress, and it should be secured to prevent damage or disconnection. The cable's connections should be checked regularly to ensure that they remain secure and that the cable is functioning properly.
Go to product