The Rockwell Automation 2090-CSBM1DG-14AF-X274 is a Kinetix Single Cable designed for use with Kinetix 5500 or Kinetix 5700 servo drives. This cable is part of the 2090 Series Servo Motor Cables and is certified to the CE directive.
Technical Specifications
- Cable Type: Kinetix Single Cable
- Drive-end Connector Type: DG Single Cable for K5700/K5500
- Motor-end Connector Type: Single SpeedTec DIN Connector
- Wire Gauge Size (AWG): 14 AWG
- Cable Material: TPE (Thermoplastic Elastomer)
- Flexibility: Continuous-flex
- Length: 20 meters (as specified in some sources, but not all)
Alarm/Error Codes
No specific alarm or error codes are mentioned in the provided documentation. These codes are typically specific to the drive or control system and are not typically documented for a cable alone.
User Manuals
The user manuals for the 2090 Series Servo Motor Cables are available from Rockwell Automation's website, but they do not contain detailed information on the specific cable part number 2090-CSBM1DG-14AF-X274. The manuals provide general information on the cable specifications, installation, and troubleshooting for the 2090 Series.
Troubleshooting
Troubleshooting for the 2090 Series Servo Motor Cables is typically done by identifying the specific issue and following the troubleshooting procedures outlined in the user manuals or the documentation for the drive or control system being used. The troubleshooting process involves checking the cable connections, inspecting the cable for damage, and verifying the cable specifications match those of the drive or control system.
Programming
The programming of the 2090 Series Servo Motor Cables is typically done through the drive or control system being used. The programming involves setting the drive parameters, such as the motor speed and acceleration, and configuring the control system to communicate with the drive. The specific programming procedures are typically outlined in the user manuals for the drive or control system.
Installation
The installation of the 2090 Series Servo Motor Cables involves connecting the cable to the drive and motor, ensuring proper connections and securing the cable to prevent damage or movement during operation. The installation procedures are typically outlined in the user manuals for the drive or control system.
Go to product