The part number 2090-CSBM1DG-10AF20 is a single motor cable designed for use with Kinetix 5500 or Kinetix 5700 servo drives. It is a standard, non-flexible cable with a wire size of 18 AWG and a length of 10 meters. The cable is made of PVC material and has a continuous bend radius of 150 mm (5.9 inches) and an expected flex cycle at the rated radius of 10 million cycles. It is designed for applications where the cable length exceeds the standard 50 meters (164 feet) and is available in 1.0 meter (3.3 feet) increments.
Technical Specifications
- Cable Type: Standard, non-flexible cable
- Wire Size: 18 AWG
- Length: 10 meters
- Material: PVC
- Continuous Bend Radius: 150 mm (5.9 inches)
- Expected Flex Cycles at Rated Radius: 10 million cycles
Alarm/Error Codes
No specific alarm or error codes are mentioned in the provided documentation for this part number. It is likely that any error codes or alarm conditions would be specific to the Kinetix 5500 or Kinetix 5700 servo drives that this cable is designed for, and would be documented in the user manuals or technical documentation for those drives.
User Manuals
The user manuals for the Kinetix 5500 and Kinetix 5700 servo drives, as well as the 2090-Series Single Motor Cables, are available from Rockwell Automation. These manuals provide detailed information on the installation, operation, and troubleshooting of the cables and drives.
Troubleshooting
Troubleshooting for the 2090-Series Single Motor Cables would typically involve checking the cable connections, inspecting the cable for damage, and verifying that the cable is properly configured for the specific application. For issues with the Kinetix 5500 or Kinetix 5700 servo drives, troubleshooting would involve checking the drive's configuration, monitoring its performance, and consulting the user manuals or technical documentation for the drives.
Programming
The programming of the Kinetix 5500 and Kinetix 5700 servo drives is typically done using specialized software provided by Rockwell Automation. This software allows users to configure the drives, set parameters, and monitor their performance. The specific programming procedures and software used would depend on the specific application and the type of drive being used.
Installation
The installation of the 2090-Series Single Motor Cables involves connecting the cable to the motor and the drive, ensuring that the cable is properly secured and not damaged during the installation process. For the Kinetix 5500 and Kinetix 5700 servo drives, installation typically involves connecting the drive to a power source, configuring the drive's parameters, and connecting the motor to the drive. The specific installation procedures would depend on the specific application and the type of drive being used.
Go to product